Sharpe Heavy-Duty Portable Mixers

Sharpe Mixers offers heavy-duty portable mixers to meet the toughest applications. Our direct drive drive portable mixers provide high-speed mixing for those jobs where greater shearing action is required and for smaller batch mixing. The high speed of the impellers (1750 rpm) create localized high-velocity eddies (high shear) necessary for many applications such as dispersing and dissolving dry powders into a solution.

Our gear drive portable mixers are the best choice for larger volume and higher-viscosity applications. The slower speed (350 rpm) provides the high torque necessary to mix higher viscosity fluids and the higher flow required in larger tanks. Large diameter HYF-218 impellers produce much more flow per horsepower than other mixers on the market.

Both mixers come with standard NEMA 56C frame motors, providing "off the shelf" availability and a wide range of motor options.

The alloy mixer housings are powder coated for maximum durability.

The shaft coupling is protected from corrosion, safely located inside the sealed housing. No exposed coupling means a safer mixer as well.

Oversize 3/4", 1" and 1-1/4" diameter shafts are used for maximum stability & strong life.

Finally, all standard mixer components are stocked on our shelves and available for immediate shipment!

To find out more, contact us today with your mixing needs!

Next generation dry-running mechanical seals

Sharpe Mixers has partnered with Roplan AB of Sweden, a leading supplier of sanitary and industrial mechanical seals, to develop our RD line of dry-running mechanical seals. The Sharpe Mixers Dry Running RD Mixer Seal has been designed specifically for use in mixers, agitators and reactors where possible product contamination from barrier fluids is not allowed. The design is capable of handling 0.15” total run-out. A proprietary Carbon blend virtually eliminates the face squeal that is common with other seal brands. The seal is available with a plain mounting flange or with a debris well.

The first generation of the seal was similar to existing products in the market such as Flowserve’s VRA or John Crane’s Type 32 mechanical seals. We are now releasing the next generation of this product which surpasses anything currently in the market in its adherence to ASME’s Bioprocessing Equipment (BPE) standard. Both Sharpe Mixers and Roplan are working with the BPE committees on seal design. The design has been updated to enhance cleanability. Internal surfaces have been sloped to facilitate drainage, including the debris well flush ports. All non-metal wetted components are either FDA approved or USP Class VI rated, standard. Internal metal surfaces have been polished to a minimum 20 Ra finish, standard. For the same cost as another supplier’s basic, non-pharmaceutical seal you could have a fully BPE compliant seal!

The seal comes as a cartridge assembly (see image below) for easy installation and the proper running height is pre-set with the cartridge clips. No more measuring! Just bolt the seal plate down, slide the shaft through, and tighten the setscrews. Wetted metal parts are etched with a heat number which is traceable to a mill test report to verify proper alloy to help simplify your system validation.

Seals can be made with special materials as well to accommodate your needs. If you want the most BPE compliant dry-running mixer seal on the market, come to Sharpe Mixers.

Materials of Construction

Rotary Seal: FDA approved Carbon

Stationary Seal: FDA approved Silicone Carbide
Metal Components: 316L Stainless Steel

Elastomers: USP Class VI FPM or EPDM Standard

Performance Capability

Temperature: Up to 300F (149C)

Pressure: Full vacuum to 200PSI (13.8 bar)

Speed: Up to 350 RPM

Sizes: 5/8” – 3”